Emerson Rosemount 3308, Справочное руководство

Страница: 33 / 128

Reference Manual
00809-XXXX-4811, Rev AA
February 2012
3-7
Rosemount 3308
PRELIMINARY
AMS
Right click on the Rosemount 3308 transmitter and select Configure . When
the menu opens, select Join Device to Network and complete the method to
enter the Network ID and Join Key.
Field Communicator
Connect the field communicator leads to the COMM terminals on the terminal
block as shown in Figure 3-7.
Figure 3-7. Terminal Block with
COMM terminals
The Network ID and Join Key may be changed in the wireless device on a
Field Communicator by using the Fast Key Sequence shown in Table 3-1.
Table 3-1. Rosemount 3308
Fast Key Sequence
Fast Key Sequences
Table 3-1 lists the fast key sequence for common transmitter functions.
Table 3-2. Rosemount 3308
Fast Key Sequence
REMOVE POWER
MODULE
If doing a bench top configuration, after the sensor and network have been
configured, remove the Power Module and replace the transmitter cover. The
Power Module should be inserted only when the device is ready for
commissioning.
P/N 00753-9200-2410
COMM terminals
Function Key Sequence Menu Items
Join Device to Network 2, 1, 2 Network ID, Set Join Key
Function Key Sequence Menu Items
Device Information 2, 2, 4 Manufacturer, Model, Final Assembly Number,
Universal, Field Device, Software, Hardware
Descriptor, Message, Date, Model Number, I, II,
III, SI Unit Restriction, Country
Guided Setup 2, 1 Join Device to Network, Configure Update Rate,
Configure Sensor, Calibrate Sensor, Configure
Display, Configure Process Alarms
Manual Setup 2, 2 Wireless, Process Sensor, Percent of Range,
Device Temperature, Device Information,
Device Configure, Other
Wireless 2, 2, 1 Network ID, Join Device to Network, Configure
Update Rate, Configure Broadcast Power Level,
Power Mode, Power Source