manualshive.com logo in svg

Emerson Rosemount 326P, Быстрый старт

Поделиться
Скачать
Emerson Rosemount 326P Скачать руководство пользователя страница 22

values are set. The pressure transmitter changes the parameter values immediately for
COF, CP1, and CP2.

3.3.1

Modify parameter settings

Follow these steps to modify parameter values.

Procedure

1. Press 

Mode/Enter

 to select a parameter.

2. Press and hold 

Set

.

The pressure transmitter flashes the current value for five seconds.

3. Modify the parameter value.

•

Press 

Set

 to change the value incrementally.

•

Press and hold 

Set

 to change the value continuously.

•

To reduce the value, continue to press 

Set

 until the pressure transmitter reaches

the value limit and restarts at the value minimum.

4. Press 

Mode/Enter

.

The pressure transmitter displays the parameter and saves the new parameter
value.

Switching menu levels

Follow these steps to change from the main menu to the extended functions menu.

Procedure

1. Press 

Mode/Enter

 until the pressure transmitter displays 

EF

.

2. Press 

Set

.

The pressure transmitter displays 

Uni

.

3. If the extended menu is locked with an access code, enter the access code.

a) Press 

Set

 until the pressure transmitter displays the valid access code.

b) Press 

Mode/Enter

.

By default the extended functions menu is unlocked.

Locking and unlocking the pressure transmitter

Follow these steps to lock or unlock the pressure transmitter. While locked, the pressure
transmitter does not allow parameter values to change and displays 

Loc

 if attempted.

Procedure

1. To lock: press and hold 

Mode/Enter

 and 

Set

 for 10 seconds.

The pressure transmitter locks and displays 

Loc

.

2. To unlock: press and hold 

Mode/Enter

 and 

Set

 for 10 seconds while the pressure

transmitter is locked.
The pressure transmitter unlocks and displays 

uLoc

.

Operation

Quick Start Guide

January 2019

00825-0100-4327

22

Quick Start Guide

Содержание Rosemount 326P

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды