Emerson Rosemount 3051P, Справочное руководство, Страница: 89 / 110

Specifications and Reference Data
79
Specifications and Reference Data
May 2017
Reference Manual
00809-0700-4001, Rev AA
A.6 Options
A.6.1 Standard configuration
Unless otherwise specified, transmitter is shipped as
follows:
A.6.2 Custom configuration
If Option Code C1 is ordered, the customer may specify the
following data in addition to the standard configuration
parameters.

Output Information

Transmitter Information

LCD display Configuration

Hardware Selectable Information

Signal Selection
Refer to the Rosemount 3051 Configuration Data Sheet .
A.6.3 Tagging (3 options available)

Standard SST hardware tag is permanently affixed on
transmitter. Tag character height is 0.125 in. (3,18 mm),
84 characters maximum.

Tag may be wired to the transmitter nameplate upon
request, 85 characters maximum.

For HART protocols, the tag may be stored in transmitter
memory (eight characters maximum). Software tag is left
blank unless specified.
– HART Revision 5: 8 characters
– HART Revision 7: 32 characters
Y2 Nameplates, Labels, Tags and Fasteners

316SST Nameplates, Labels, Tags and Fasteners
A.6.4 Optional Rosemount 306
integral manifolds
Factory assembled to Rosemount 3051P Transmitters.
Rosemount 306
Product Data Sheet for additional
information.
A.6.5 Other seals
Refer to Rosemount DP Level Product Data Sheet for
additional information.
A.6.6 Output information
Output range points must be the same unit of measure.
Available units of measure include:
A.6.7 Display and interface options
M4 Digital Display with LOI

Available for 4-20 mA HART, 4-20 mA HART Low Power
M5 Digital Display

2-Line, 5-Digit LCD for 4-20 mA HART

2-Line, 5-Digit LCD for 1-5 Vdc HART Low Power

Direct reading of digital data for higher accuracy

Displays user-defined flow, level, volume, or pressure
units

Displays diagnostic messages for local troubleshooting

90-degree rotation capability for easy viewing
Engineering units
psi (all ranges)
4 mA
0 (engineering units)
20 mA
Upper range limit
Output
Linear
Flange type
Specified model code option
Flange material
Specified model code option
O-ring material
Specified model code option
Drain/vent
Specified model code option
LCD display
Installed or none
Alarm
High
Software tag
(Blank)
Pressure units
(1)
1. Field configurable only, not available for factory calibration or custom configura-
tion (option code C9 “Software configuration”).
torr psf
(1)
cmH
2
O@4 °C
(1)
atm inH
2
O mH
2
O@4 °C
(1)
Pa inH
2
O@4 °C
(1)
inHg
kPa inH
2
O@60 °F (1) mmHg
MPa
(1)
ftH
2
O cmHG@0 °C
(1)
hPa (1) ftH
2
O@4 °C (1) mHG@0 °C (1)
mbar ftH
2
O@60 °F
(1)
g/cm
2
bar mmH
2
O kg/m
2 (1)
psi mmH
2
O@4 °C
(1)
kg/cm
2