Essential Instructions
Read this page before proceeding
Rosemount designs, manufactures, and tests its products to meet many national and international
standards. Because these instruments are sophisticated technical products, you must properly install, use,
and maintain them to ensure they continue to operate within their normal specifications. The following
instructions must be adhered to and integrated into your safety program when installing, using, and
maintaining Rosemount products. Failure to follow the proper/ instructions may cause any one of the
following situations to occur: Loss of life; personal injury; property damage; damage to this instrument; and
warranty invalidation.
•
Read all instructions prior to installing, operating, and servicing the product. If this Instruction Manual is
not the correct manual, telephone 1-800-654-7768 and the requested manual will be provided. Save this
Instruction Manual for future reference.
•
If you do not understand any of the instructions, contact your Rosemount representative for clarification.
•
Follow all warnings, cautions, and instructions marked on and supplied with the product.
•
Inform and educate your personnel in the proper installation, operation, and maintenance of the product.
•
Install your equipment as specified in the Installation Instructions of the appropriate Instruction Manual
and per applicable local and national codes, for example, ANSI B16.5. Connect all products to the proper
electrical and pressure sources.
•
To ensure proper performance, qualified personnel should install, operate, and maintain the product.
•
When replacement parts are required, ensure that qualified people use replacement parts specified by
Rosemount Analytical. Replacement of original components with those constructed from alternative
materials will void any CSA, FM, and BASEEFA/CENELEC agency approvals that were applicable to the original
device. Furthermore, replacement of original components with those constructed from alternative materials
might change the pressure, temperature, and/or performance specifications from those of the original
configuration. Ensure replacement parts are compatible with process requirements. Unauthorized parts and
procedures can affect the product’s performance, place the safe operation of your process at risk, and may
result in fire, electrical hazards, or improper operation.
•
Ensure that all equipment doors are closed and protective covers are in place, except when maintenance is
being performed by qualified persons, to prevent electrical shock and personal injury.
DANGER
HAZARDOUS AREA INSTALLATION
Installations near flammable liquids or in hazardous area locations must be carefully evaluated by qualified
on site safety personnel. This sensor is not Intrinsically Safe or Explosion Proof.
To secure and maintain an intrinsically safe installation, the certified safety barrier, transmitter, and sensor
combination must be used. The installation system must comply with the governing approval agency (FM,
CSA, BASEEFA/CENELEC, or ATEX) hazardous area classification requirements. Consult your analyzer/
transmitter instruction manual for details.
Replacement of original components with those constructed from alternative materials will void any CSA,
FM, and BASEEFA/CENELEC agency approvals that were applicable to the original device.
Proper installation, operation and servicing of this sensor in a Hazardous Area Installation is entirely the
responsibility of the user.
CAUTION: SENSOR/PROCESS APPLICATION COMPATIBILITY
The wetted sensor materials may not be compatible with process com position and operating conditions.
Replacement of original components with those constructed from alternative materials might change the
pressure, temperature, and/or performance specifications from those of the original sensor configuration.
Application compatibility is entirely the responsibility of the user.
