Emerson Rosemount 2230, Справочное руководство

Страница: 69 / 156

59
Reference Manual
00809-0100-2230, Rev CA
Configuration and Operation
July 2017
Configuration and Operation
4.10.2 Factory configuration
The following fixed configuration of function blocks is provided:
Table 4-5. Available function blocks for the Rosemount 2230
4.11 Multiple Analog Output blocks
To show input data from MAO blocks on the display, the Rosemount 2230 needs to be configured by
using F
OUNDATION
fieldbus parameters which are available in the Display Transducer Block (see “Display
transducer block” on page 133 ).
4.11.1 Configure the MAO blocks
A MAO Block is used for receiving measurement data from devices such as the Rosemount 5900S Radar
Level Gauge. The Rosemount 2230 is supplied with four pre-configured MAO blocks according to
Table
4-5 on page 59 . Each MAO block has eight inputs.
Note that the CHANNEL parameter value has to be equal to 1 (auto) in order to provide data output from
the MAO block.
An example of a setup with a Rosemount 2230 receiving data from a Rosemount 5900S and a
Rosemount 2240S is shown in
Figure 4-11 on page 60 .
Function Block Index Default Tag Available
Multiple Analog Output 1400 MAO_1400 Permanent
Multiple Analog Output 1500 MAO_1500 Permanent
Multiple Analog Output 1600 MAO_1600 Permanent
Multiple Analog Output 1700 MAO_1700 Permanent