121
Product Certifications
January 2017
Reference Manual
00809-0100-4140, Rev AA
Appendix B
Product Certifications
B.1 Overview
This appendix contains information on European directives and
hazardous locations certifications.
B.2 European directive information
A copy of the EU Declaration of Conformity can be found at the end
of the Rosemount 2140
Product Certifications Manual
and at
Emerson.com/Rosemount
.
B.3 Ordinary locations certifications
G5
USA ordinary location certification
Certificate: 16 CSA 70098390
Standards: UL 61010-1 (3rd Edition)
The level detector has been examined and tested to
determine that the design meets basic electrical, mechanical,
and fire protection requirements by CSA, a nationally
recognized testing laboratory (NRTL) as accredited by the
Federal Occupational Safety and Health Administration
(OSHA). Type 4X.
G6
Canada ordinary location certification
Certificate: 16 CSA 70098390
Standards:
CAN/CSA C22.2 No 61010-1-12, and
ANSI/ISA-12.27.01:2003
The level detector has been examined and tested to
determine that the design meets basic electrical, mechanical,
and fire protection requirements by CSA, a nationally
recognized testing laboratory as accredited by the Standards
Council of Canada (SCC). Type 4X. Single Seal.
Special conditions for use (G5 and G6)
1. To be supplied from a Class 2 or Limited Energy Source in
accordance with CAN/CSA C22.2 No. 61010-1-12.
B.4 Hazardous locations certifications
B.4.1 North America and Canada
Note
For full product approvals information, refer to the
Rosemount 2140
Product Certifications Manual
.
E5
USA Explosion-proof (XP)
Certificate: CSA 16CA70098990X
Standards:
FM Class 3600 - 2011,
FM Class 3615 - 2015, and
UL 61010-1 (3rd Edition)
Markings:
Class I Groups B, C and D, T5, Type 4X
Class I, Zone 1, AEx db IIC T6…T2 Gb
E6
Canada Explosion-proof
Certificate: CSA 16CA70098990X
Standards:
ANSI/ISA 12.27.01:2003,
CSA Std. C22.2 No. 30 -M1986,
CSA Std. C22.2 No.60079-0-15,
CSA Std. C22.2. No.60079-1-16,
CSA Std. C22.2 No. 61010-1-12, and
CSA Std. C22.2 No.94-M91
Markings:
Class I Groups B, C and D, T5, Type 4X
Ex db IIC T6…T2 Gb
Special conditions for use (X) (E5 and E6)
1. The user is to ensure the probe assembly is installed in such a
way to prevent any damage due to impact or ignition source
due to friction.
2. The enclosure may be given a non-standard paint finish
which may constitute a potential electrostatic ignition risk.
Care should be taken to protect it from external conditions
conducive to the build-up of electrostatic charge on such
surfaces. The enclosure must not be rubbed or cleaned with
a dry cloth.
3. Flameproof joints are not intended for repair.
4. To be supplied from a Class 2 or Limited Energy Source in
accordance with CAN/CSA C22.2 No. 61010-1-12.
Содержание Rosemount 2140
