Emerson Rosemount 2088, Справочное руководство

Страница: 90 / 126

81
Reference Manual
00809-0100-4108, Rev BA
Appendix A: Specifications and Reference Data
March 2014
Appendix A: Specifications and Reference Data
A.6 Options
Standard configuration
Unless otherwise specified, transmitter is shipped as follows:
Custom configuration
If Option Code C9 is ordered, the customer may specify the following data in addition to the
standard configuration parameters.

Output Information

Transmitter Information

LCD display Configuration

Hardware Selectable Information

Signal Selection
Refer to the “Rosemount 2088 Configuration Data Sheet” document number
00806-0100-4690.
Tagging (3 options available)

Standard SST hardware tag is permanently affixed on transmitter. Tag character height
is 0.125 in. (3,18 mm), 84 characters maximum.

Tag may be wired to the transmitter nameplate upon request, 85 characters
maximum.

For HART protocols, the tag may be stored in transmitter memory (eight characters
maximum). Software tag is left blank unless specified.
–- HART Revision 5: 8 characters
–- HART Revision 7: 32 characters
Optional Rosemount 306 Integral Manifolds
Factory assembled to 2088 transmitters. Refer to Product Data Sheet (document number
00813-0100-4733 for Rosemount 306) for additional information.
Engineering units
psi (all ranges)
4 mA (1 Vdc)
0 (engineering units)
20 mA (5 Vdc)
Upper range limit
Output
Linear
Flange type
Specified model code option
Flange material
Specified model code option
O-ring material
Specified model code option
Drain/vent
Specified model code option
LCD display
Installed or none
Alarm
High
Software tag
(Blank)