manualshive.com logo in svg

Emerson Rosemount 1151, Быстрое руководство по установке

Поделиться
Скачать
Emerson Rosemount 1151 Скачать руководство пользователя страница 6

Quick Installation Guide

00825-0100-4593, Rev BA

July 2009

Rosemount 1151

6

S

TEP

 2: C

ONSIDER

 H

OUSING

 R

OTATION

To improve field access or to better view the optional LCD display:

1. Loosen the housing lock nut. 
2. Rotate the housing clockwise to the desired position – up to 90° from its original position. 

Over rotating will damage the transmitter.

3. If the desired position is attained, tighten the housing lock nut.
4. If the desired position cannot be reached because the housing will not rotate further, 

rotate the housing counterclockwise until in the desired position (up to 90° from its 
original position).

5. Tighten the housing lock nut to 420-in/lb. Use a sealing compound 

(Loctite 222 – Small Screw Threadlocker) on the threads to ensure a watertight seal on 
the housing.

NOTE

If the desired position cannot be attained within the 90° limit, the transmitter will need to be 
disassembled. See the Rosemount 1151 reference manual (document number 
00809-0100-4360) for further instruction.

Housing Lock Nut

4593_Rev_BA.fm  Page 6  Friday, August 7, 2009  3:38 PM

Содержание Rosemount 1151























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды