26 – English – rM200
Disposal
Parts of your system contain valuable mate-
rials that can be recycled. There are compa-
nies that specialize in recycling that may be
found locally. Dispose of the components in
compliance with all applicable regulations.
Contact your local waste management au-
thority for more information.
EC Countries:
Do not dis-
pose of electrical equipment
with household waste!
According to the Europe-
an Guideline 2012/19/EU for
Waste Electrical and Elec-
tronic Equipment and its im-
plementation into national
legislation, electrical equip-
ment that is no longer usable
must be collected separately
and disposed of in an environ-
mentally correct manner.
Battery Disposal
EC Countries:
Defective or used batteries
must be recycled according to the guideline
2006/66/EEC.
Appendix
Appendix A: Stow Bin
Instructions
Can Holder Orientation
NOTICE
The can holder on the stow
bin must be on the front
side of the rM200 case so
that it does not interfere
with the pull handle.
To orient the can holder, follow these steps:
1. Remove the can holder (Item 1) and
the replacement plate (Item 2) with a
Phillips screwdriver from inside of the
stow bin.
2
1
2. Install the can holder on the other side
of the stow bin and screw the replace-
ment plate into place.
