3
motor specifications and
electrical Requirements
sAve thIs mANuAl
This Air Mover is provided with a 3-speed,
115 volt, 60 Hz induction motor with a
grounding conductor. It is thermally
protected and will automatically shut down
if over-heated. Once it cools, the motor
will restart automatically if not unplugged.
In the event of a malfunction or
breakdown, grounding provides a path
of least resistance for electric current
to reduce the risk of electric shock.
cAutIoN:
• this Air mover has an automatic
motor shutoff device; it may
restart without notice. to reduce
the risk of injury, unplug before
servicing.
• Do not use an extension cord with
this fan.
• Do not run cord under carpeting.
Do not cover cord with throw rugs,
runners, or similar coverings.
Do not route cord under furniture or
appliances. Arrange cord away from
traffic area and where it will not be
tripped over.
• Do not handle plug, switch, or the
Air Mover with wet hands.
• Observe the 8 Amp maximum on-board
convenience outlet rating when
interconnecting units together.
• Do not put any object into air intake
openings.
• Keep hair, loose clothing, fingers,
and all parts of body away from
openings and moving parts.
• Direct air discharge only at work area.
Do not direct air at bystanders.
• All disassembly and repairs should be
performed by qualified personnel.
• Do not operate any fan with a
damaged cord or plug. Discard fan or
return to an authorized service facility
for examination and/or repair.
Observe the following warnings that
appear on the motor housing of your
Air Mover:
cAutIoN:
• For dusty operations, wear dust mask.
• Do not move or carry Air Mover when it
is operating.
• Only operate on a level and stable
surface to prevent it from falling and
possibly causing injury or damage to unit.
!
WARNING: to reduce the risk of
electric shock, connect only to a
GfcI protected outlet. Do not expose
to water or rain. Indoor use only.
!
!
WARNING: Do not exceed
8 Amps through the on-board
convenience outlets.
!
WARNING: to ReDuce the RIsK
of tIP-oveR DuRING stoRAGe,
stAcK 2-hIGh oNlY.
!
This Air Mover is equipped with an electric
cord having an equipment grounding
conductor and a grounding plug. The plug
must be plugged into a matching outlet
that is properly installed and grounded in
accordance with all local codes and
ordinances.
Do not modify the plug provided. If it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
SP7019 3-Speed Air Mover.qxp_SP7019 Air Mover 2/23/17 11:19 AM Page 3
