11
LISTENING TO THE RADIO
1.) Set the
FUNCTION
selector switch, located on the front cabinet, to the
FM/
AUTO
or
AM
position.
2.) Press the
POWER ON/OFF
button on the top panel
to turn the system ‘On’. The
POWER
indicator and
the radio dial lighting come ‘On’.
3.) Rotate the Tuning knob to tune in the desired station.
If you tune to an FM Stereo station the
FM ST.
indicator will light.
4.) Rotate the
VOLUME
control to the desired level.
5.) When you are finished listening press the
POWER ON/OFF
button on the top
panel to shut the power ‘Off’. The
POWER
indicator and the dial lighting goes
‘Off’.
Hints For Better Reception
FM
– The FM Antenna is built in to the AC power cord. Make sure that the cord is
extended to its full length.
AM
– The AM bar antenna is inside the cabinet. IF AM reception is unsatisfactory
try turning the cabinet slightly until the internal antenna picks up the strongest
signal.
RET66_080504.p65
5/8/2004, 16:05
11
