14
LISTENING TO THE RADIO
1.) Set the BAND selector to either the AM or FM position.
2.) Press the RADIO ON/OFF button to turn the radio ‘On’. The LED dial pointer
comes ‘On’.
3.) Turn the TUNING control to tune to the desired station.
4.) Adjust the VOLUME control to the desired level.
5.) When you are finished listening press the RADIO ON/OFF button to turn the
radio ‘Off’. The LED dial pointer goes ‘Off’.
Antenna Information
FM
The FM antenna is built in to the AC power cord. Be sure the power cord is
completely unwound and extended to its full length for best FM reception.
AM
The AM ferrite bar antenna is located inside the radio cabinet. If AM reception is
unsatisfactory you may have to change the position of the cabinet until the internal
AM antenna picks up the strongest signal.
CKA1100_drafts052102.p65
21/5/2002, 15:19
14
