9
REGAL 3F
Slam Shut
Version with Type VSX2 integral slam shut
• Disconnect the impulse pipe (IS)
• Unscrew the screws (key 14) and remove the VSX2 slam shut
• Control the valve plug (key 13)
• Disassembly : see D103683X012 manual
Version with Type OS2 integral slam shut
• Disconnect the impulse pipe (IS)
• Unscrew the screws (key 14) and remove the OS2 slam shut
• Unscrew screws (key 17) from the mechanism box
(key 16)
• Disconnect the valve axe (key 15) from the mechanism
box yoke (key 16)
• Remove the connecting part (key 18) and the valve axle
(key 15)
• Contrôler le clapet de sécurité (key 13)
Reassembly
• Perform the above operations in reverse order (respect
tightening torques)
• Diaphragms to be changed every 6 years or less
depending on condition
• Respect the relief valve setpoint dimension noted during
disassembly
• Replace O-rings at each disassembly
• Lubricate screws before tightening
• Lightly lubricate O-rings (silicone grease)
• Lightly lubricate the valve plug stem (silicone grease)
• Lightly lubricate the slam shut valve plug stem (silicone
grease)
• Lubricate springs (molybdenum graphite grease)