6
March 2018
Repair Instruction Manual
DOC.SAFM.Q4.E Rev. 0
2 Disassembly procedure
IMPORTANT
In order to replace the adjustment screws, first the feedback mechanism needs to be disassembled.
1. Remove the cover screws on the back side of the control module. Check if the O-ring seals are in good shape.
Replace if neccesary.
Figure 3
Remove the cover screws
3 mm Allen key
Pay attention to the
two bound seal washers
2. Remove the cover and guide bushing. Check if the O-ring seals are in good shape. Replace if neccesary.
Figure 4
Remove cover and guide bushing
Pay attention
to the
two bound
seal washers
Guide
bushing
