14
U.L. Model No.: CF5100
11. Optional AL100 Accent Light Installation
11.1
CAUTION: To reduce the risk of electric shock,
disconnect the electrical supply circuit to the fan
before installing light kit assembly.
Position the AL100 accent light so that the opening of
the AL100 accent light slides through the downrod.
Align the mounting holes of the AL100 accent light to
the motor assembly (Figure 22).
NOTE: Be sure the AL100 accent light connector is
located close to the motor assembly connector for
ease of installation.
Install the AL100 accent light to the motor assembly
using three AL100 accent light mounting screws
(Figure 22).
AL100 ACCENT
LIGHT HARNESS
AL100 ACCENT
LIGHT HARNESS
SCREW (3)
MOTOR
ASSEMBLY
Figure 22
11.2
Securely connect the AL100 accent light connector to
the motor assembly connector (Figure 23).
Screw the four 25-watt candelabra base bulbs
(supplied) into the AL100 accent light sockets
(Figure 23).
NOTE: When installing an AL100 Accent Light, an
Emerson Accessory must be installed in order to
operate the light.
It is recommended to use either an Emerson SR600,
SW605 or SR650 Transmitter and the RCK55
Receiver.
See RCK55 for installation instructions of the
control.
25-WATT
CANDELABRA
BASE BULBS (4)
AL100 ACCENT
LIGHT SOCKETS (4)
LIGHT KIT &
MOTOR ASSEMBLY
CONNECTORS
Figure 23
BP7480 CF5100 PENBROOKE SELECT 12/18/13 10:35 AM Page 14
