12
SETTING THE CLOCK
Clock can be set while clock time is displayed, at Power ‘Off’ mode only, and follow
the procedures below:
1.) Press the MEMORY button for more than one
second. The Hour will start flashing.
2.) Adjust the hour by pressing the
/
buttons. Set the correct hour for AM
AM
or PM.
3.) Press MEMORY button to confirm. Minutes will start
flashing.
4.) Adjust the minutes by pressing the
/
buttons.
s.
5.) Press MEMORY button to store the time.
NOTE:
• If button is not pressed within 5 seconds, the clock display stops flashing.
• If the unit is disconnected from the AC power and no batteries installed, you
will need to reset the clock.
AM
PROGRAM
MEMORY
PM
PM
PD6900_ib_053102.p65
31/5/2002, 17:24
12
