9
OPERATING INSTRUCTIONS
Setting The Clock
Note
: The clock can only be set at
TAPE
mode, or when power is ‘Off’.
1.) Press the
CLOCK/MEMORY/AUTO PRESET
button on the top panel
.
“
12 H
” will begin flashing in the display indicating that the clock is set for
“American” 12-hour time.
Press either the
or
button on the top panel to change the clock format
to “European” 24-Hour time if desired.
The display will change from “
12H
” to “
24H
”.
2.) Press the
CLOCK/MEMORY/AUTO PRESET
button. The Hour digits will begin flashing.
3.) Press the
or
buttons to set the display to the correct Hour,
,
AM
or
PM
.
4.) Press the
CLOCK/MEMORY/AUTO PRESET
button again. The Minute digits will begin
flashing.
5.) Press the
or
buttons to set the display to the correct Minute.
6.) Press the
CLOCK/MEMORY/AUTO PRESET
button once more.
The colon “
:
” begins flashing and the clock
starts to run.
Notes
: The correct time will always appear on the display in
TAPE
mode and
when power is ‘Off’.
PD3812_B032305.p65
23/3/2005, 15:02
9
