G2-2 Series A-B 1771 Remote I/O
Quick Start Manual
Page 10
3835050 TDG22ABQS3-0
1/07
Subject to change without notice
www.numatics.com/fieldbus
10) Factory Default Settings
Unless otherwise requested, all standard G2-2 Series A-B 1771 Remote I/O manifolds ship with specific factory
default settings. Below is a list of the factory default settings:
Description
Default Settings
Rack Address
0
Baud Rate
57.6 K
Starting Quarter
1st
Processor Restart/Lockout
Off (Processor Restart)
Hold Last State
Off (Reset Outputs)
Input Module Power Jumper
PU
(Input sensor power supplied by
+24VDC Node and Inputs pin on the Aux. power connector)
Output Module Power Jumper
SP
(Output module power supplied by
+24VDC Valves and Outputs pin on the Aux. power connector)
Valve Side Output Bytes
4 Bytes (32 Allocated Valve Coil Outputs)
Discrete I/O Side - I/O Bytes
Self-Configuring based on the I/O modules installed.
11) Technical Support
For technical support, contact your local Numatics distributor. If further information is required,
please call Numatics Inc. at (248) 887-4111 and ask for Technical Support.
Issues relating to network set-up, PLC programming, sequencing, software related functions, etc…
should be handled with the appropriate product vendor.
Information on device files, technical manuals, local distributors, and other Numatics, Inc. products
and support issues can be found on the Numatics, Inc’s. WEB site at
www.numatics.com
