8
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) To turn the system ‘on’, rotate the ON
/OFF-VOLUME
control clockwise until a
‘click’ is heard, and set the Volume to a low level. The Tuning Dial comes ‘on’.
2.) Set the Function
selector (
AM/FM/CD
) to the
desired band,
AM
or
FM
.
3.) Rotate the
TUNING
control to tune to the desired radio station. If you tune to an
FM Stereo station, the
FM
ST.
indicator will come ‘on’.
4.) Adjust the ON
/OFF-VOLUME
control as desired.
5.) When you are finished listening turn the ON
/OFF-VOLUME
control counter
clockwise until a ‘click’ is heard.
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try
repositioning the cabinet slightly until the internal antenna is picking up the strongest
signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the position
and direction of this antenna until you find the position that provides the best
reception.
AM
CD
TUNING
OFF
VOLUME
FM
NR51_011604.p65
16/1/2004, 10:46
8
