Reference Manual
Programming
MAN-0076, Revision 09
June 2016
Programming
15
Section 4:
Programming
4.1
Menu options
The main menu provides access to various functional settings/options, as seen in the list below. Each
menu option has a submenu, where configuration is completed.
Calibrate Sensor
Enable/Disable Channels
Set Alarm Level
Set Relay Option (available on relay models)
Relay Assignment (available on relay models)
Alarm Mode setting
Select Display Language
Modbus Setup (available on Modbus models)
Setup Current Date
Setup Current Time
View Events Log
Manual Reset
Self-test Relay
Sensor Upper Limit (Range)
Select Gas Type
Cal Gas Value
Serial Number and Firmware version
Exit
4.2
Navigating main menu
Navigation through the menu options is done by activating menu button 1 or 2. The same function is
provided using the magnet to select Reed switch 1 (indicated by printed magnet in the 8’ o clock
position on the faceplate) or Reed switch 2 (indicated by printed magnet in the 6’ o clock position on
the faceplate).
1.
Enter the main menu, either intrusive or non-intrusive (using the magnet), by
selecting/activating any button then select “yes” by using switch 1.
2.
The message “Calibrate Sensor?” will be displayed.
3.
Activate up-down buttons (switch 1) or (switch 2) to scroll/navigate through main menu options.
4.
Select/activate the enter key (switch 3) to display sub menu.
5.
To exit the main menu, continue using the navigation keys (up-down keys) and select “Exit” with
enter key at each menu stage (sub menu and main menu).
6.
The main menu will be exited automatically if no option is selected; it takes fifty (50) seconds to
exit to each of the previous options or stage entered. If left untouched, this continues until the
main menu is fully exited.