NELSON
™
INSTALLATION
CM-GP/AXPC100-CM-GP General Purpose Temperature Controller
INSTRUCTIONS
TEL 800-621-1506
www.nelsonheaters.com
14251-001 Rev. 0
Sheet 3 of 10
November 2020
1 ½” (38 mm)
Pull excess heating cable
back through standoff.
Allow 1 ½” (3.81 cm) of heating cable
to remain above top of standoff body.
Carefully slide enclosure adapter over
cable terminations.
Screw enclosure adapter into standoff
until fully seated at positive stop.
Mount standoff securely to pipe.
Insert supplied cable tie through slot
provided to prevent possible rotation
of enclosure.
Note: For pipes 1” (25mm)
and below, install HC_SPA
(purchased separately)
between standoff and pipe.
HC-SPA adapter
for small pipes.
STEP 3
STEP 4
AXPC100-CM-GP STANDOFF INSTALLATION
Enclosure
Adapter
Cable Tie
STEP 2
STEP 1
