Emerson MVME55006E Скачать руководство пользователя | Manualshive

Страница: 131 / 146

background image

MVME55006E Single Board Computer Installation and Use (6806800A37H)

131

Safety Notes

This section provides warnings that precede potentially dangerous procedures throughout
this manual. Instructions contained in the warnings must be followed during all phases of
operation, service, and repair of this equipment. You should also employ all other safety
precautions necessary for the operation of the equipment in your operating environment.
Failure to comply with these precautions or with specific warnings elsewhere in this manual
could result in personal injury or damage to the equipment.

Emerson intends to provide all necessary information to install and handle the product in this
manual. Because of the complexity of this product and its various uses, we do not guarantee
that the given information is complete. If you need additional information, ask your Emerson
representative.

This product is a Safety Extra Low Voltage (SELV) device designed to meet the EN60950-1
requirements for Information Technology Equipment. The use of the product in any other
application may require safety evaluation specific to that application.

Only personnel trained by Emerson or persons qualified in electronics or electrical engineering
are authorized to install, remove or maintain the product.

The information given in this manual is meant to complete the knowledge of a specialist and
must not be used as replacement for qualified personnel.

Keep away from live circuits inside the equipment. Operating personnel must not remove
equipment covers. Only Factory Authorized Service Personnel or other qualified service
personnel may remove equipment covers for internal subassembly or component replacement
or any internal adjustment.

Do not install substitute parts or perform any unauthorized modification of the equipment or
the warranty may be voided. Contact your local Emerson representative for service and repair
to make sure that all safety features are maintained.

EMC (Results pending testing)

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.

«
...
129
130
131
132
133
...
»

Содержание MVME55006E



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для MVME55006E

Бренд: Yanmar Страницы: 44

Бренд: AOpen Страницы: 101

ATmega328P Xplained Mini

Бренд: Microchip Technology Страницы: 26

Бренд: ablelogic Страницы: 47

Бренд: NXP Semiconductors Страницы: 28

Бренд: NXP Semiconductors Страницы: 16

Бренд: ECS Страницы: 60

Бренд: Ublox Страницы: 21

Бренд: DFI Страницы: 130

P55 GD80 - Motherboard - ATX

Бренд: MSI Страницы: 150

nForce 680i LT SLI

Бренд: XFX Страницы: 137

Бренд: MSI Страницы: 148

Бренд: JETWAY Страницы: 47

Бренд: Biostar Страницы: 33

Бренд: Fujitsu Страницы: 72

LanParty DK P35 series

Бренд: DFI Страницы: 126

Бренд: Intel Страницы: 78

Phoenix ATX Express

Бренд: Corvalent Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды