15
5.) The player will read the Table of Contents and the
display will show the total number of tracks on the disc.
If the disc is damaged or up side down, display will
show “
– –
”.
6.) Press the
PLAY/PAUSE
button to begin playback
on Track “
01
”.
The
indicator lights up.
7.) Adjust the
VOLUME
control as desired.
8.) Playback will continue until the end of the disc. When the disc ends the display
again shows the total number of tracks on the disc.
You may also stop playback at any time by pressing the
STOP
button.
Pause Control
To pause momentarily during playback press the
PLAY/PAUSE
button again.
Playback stops but the disc continues to spin and the
indicator flashes.
Press the
PLAY/PAUSE
button once more to cancel Pause and resume
playback. The
indicator stops flashing.
Skipping Tracks and High Speed Music Search
During CD Playback, repeatedly press the
SKIP FWD
or
SKIP REV
buttons
to skip to higher or lower number tracks. When the desired track number appears
on the display, release the buttons and playback will begin on the desired track.
To rapidly search forward or back within a track to locate a specific musical passage,
depress and hold either the
or
buttons.
MS7618R_062205.p65
22/6/2005, 15:09
15
