10
PLAYING COMPACT DISCS
Normal Playback
1.) Press the POWER/STANDBY
button
on the main unit or the remote control.
The main display lighting comes 'On' and
the STANDBY LED indicator goes 'Off'.
2.) Set the CD/RADIO selector to the CD position.
Two bars "– –" will flash in the display for a few
seconds while the player tries to read the disc
and then "00" will appear, indicating that there is
no disc in the player.
3.) Press the CD DOOR OPEN
button to
open the CD door. Place a CD on the center
spindle with the printed label side facing up.
Gently press down on the disc near the
center hole to make sure that the disc is
properly 'seated' on the spindle.
4.) Press down on the CD door until it closes
completely and locks. The disc will begin to spin
for a few seconds while the player reads the table
of contents, then the disc will stop and the display
will show the total number of tracks on the disc.
5.) Press the PLAY/PAUSE
button to begin
playback. The PLAY indicator appears in the
display and playback begins on track 1.
6.) Adjust the VOLUME and BASS boost controls as desired.
7.) When the last track has played the disc stops automatically. To stop playback
at any time before the disc ends press the STOP button. The display again
shows the total number of tracks on the disc.
2
1
3
6
6
5
7
PLAY
MS7608_ib061802.p65
17/6/2002, 15:22
10
