background image

 1

For future reference, record the serial number in the space provided.

Model No: MS3100

Serial Number:

BEFORE WE BEGIN
Thank you..................
for purchasing this Emerson audio product. The Emerson brand is your assurance of
quality, performance and value.
Our engineers have included many useful and convenient features in this product.
Please be sure to read this Owner's Manual completely to make sure you are getting
the maximum benefit from each feature.
This product was manufactured using the highest quality components and standards
of workmanship. It was tested by Emerson inspectors and found to be in perfect working
order before it left our factory. However, there is always the chance that some problem
may occur because of rough handling during shipment to the retail store or to the final
consumer.
If, after reading this Manual, you experience any problems with the operation of this
product, please refer to the instructions for obtaining service at the end of this Manual.
Emerson and Emerson retailers are committed to your satisfaction. Once again, thanks
for purchasing this Emerson audio product.

DANGEROUS VOLTAGE
Uninsulated Dangerous Voltage that may be of sufficient magnitude
to constitute a risk of electric shock to persons is present within this
product's enclosure.

ATTENTION
The Owner's Manual contains important operating and maintenance
instructions.
For your safety, it is necessary to refer to the manual.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Содержание MS3100






























Отзывы: