Speed Button
This humidifier is equipped with a 3-
speed fan control. Each push of the
speed button advances the mode through
the settings of
HIGH, MEDIUM, and
LOW.
The selected setting is displayed
on the digital readout. The higher the set-
ting, the faster water is evaporated and
released into the air.
LOW
is the quietest setting and is provid-
ed for conditions that do not require a
rapid evaporation rate.
Humidity Control
The +/- buttons allows you to adjust the
humidity to suit your needs. This humidi-
fier will automatically cycle on and off as
required to maintain the selected setting.
The readout displays both actual (
ROOM
)
and desired (
SET)
humidity percentage
(%) settings. The
ROOM
reading is the
larger display of the two. The
ROOM
readout is displayed in 1% increments
and has a range of 25% to 95%. If the
room humidity level is equal to or less
than 25% the display will show a flashing
25.
The
SET
readout has a range of 30% to
65% and is adjusted in increments of 5%.
Each press of the
(
+)
button increases the setting by 5%
and conversely each press of the (
–
)
button decreases the setting by 5%. A
SET
point of 65% operates the humidifier
continuously regardless of the
ROOM
reading.
The humidistat that senses the readings
is located on the power cord. Insure that it
is free from obstruction.
8
Operating Humidifier Controls (cont’d)
Speed
Humidity
Buttons
Constant On Setting
MA1200 Manual - 71233 7/12/05 2:36 PM Page 8
