Emerson Mini Maestro DCD60x10/20, Руководство пользователя

Страница: 2 / 30

Safety Information
Persons supervising and performing the electrical installation or maintenance of a
Drive and/or its external Option Unit must be suitably qualified and competent in
these duties. They should be given the opportunity to study and if necessary to
discuss this User Guide before work is started.
The Drive is intended for operation from a nominal 60V DC supply. It is the installer’s
responsibility to ensure that this supply is safely isolated from dangerous mains
supply voltages, and correctly protected by fuses.
The Stop function of the Drive does not remove voltages from the terminals of the
Drive and external Option Unit. Mains supplies should be removed before any
servicing work is performed.
The installation instructions should be adhered to. Any questions or doubt should be
referred to the supplier of the equipment. It is the responsibility of the owner or user
to ensure that the installation of the Drive and external Option Unit, and the way in
which they are operated and maintained complies with the requirements of the
Health and Safety at Work Act in the United Kingdom and applicable legislation and
regulations and codes of practice in the UK or elsewhere.
The Drive may start automatically when power is applied. All necessary precautions
must be taken to avoid injury to personnel or damage to equipment as the result of
unexpected application of power.
The enable input of the Drive should not be relied upon to ensure safety of
personnel. If a safety hazard could exist from unexpected starting of the Drive, an
interlock should be installed to prevent the motor being inadvertently started.
General Information
The manufacturer accepts no liability for any consequences resulting from
inappropriate, negligent or incorrect installation or adjustment of the optional
operating parameters of the equipment or from mismatching the Drive with the
motor.
The contents of this User Guide are believed to be correct at the time of printing. In
the interests of a commitment to a policy of continuous development and
improvement, the manufacturer reserves the right to change the specification of the
product or its performance, or the contents of the User Guide, without notice.
All rights reserved. No part of this User Guide may be reproduced or transmitted in
any form or by any means, electrical or mechanical including photocopying,
recording or by any information storage or retrieval system, without permission in
writing from the publisher.
Copyright © June 2007 Control Techniques Drives Ltd
Issue Code: 5