Emerson Micro Motion MVD Direct Connect Скачать руководство пользователя страница 23

Страница: 23 / 30

Installation Manual

Installation

3.7

Wiring at the MVD Direct Connect I.S. barrier

1. Connect the core processor to the barrier:

a. Connect the RS-485 wires from the core processor to the I.S. RS-485 terminals at

the barrier (terminals 43 and 44), matching A and B. See

Table 3-4

and

Figure 3-12

. If

you are using Micro Motion 4-wire cable, you can identify the wires by color.

b. Connect the power supply wires from the core processor to the I.S. VDC terminals

at the barrier (terminals 42 and 41), matching positive and negative (+ and –). See

Table 3-4

and

Figure 3-12

. Do not terminate the shields at the barrier.

2. Connect RS-485 wires to the non-I.S. RS-485 terminals at the barrier (terminals 13 and

14). See

Figure 3-12

. These wires will be used in the next step to connect the barrier to

the remote host. Do not terminate the shields at the barrier.

3. Connect power supply wires to the non-I.S. VDC terminals at the barrier (terminals 11

and 12). See

Figure 3-12

. These wires will be used in the next step to connect the barrier

to the power supply.

Figure 3-12 Barrier terminals

Note

This step applies only to installations that include the MVD Direct Connect I.S. barrier. Refer to

Figure

2-3

and

Figure 2-4

Table 3-4 Core processor terminals and barrier I.S. terminals

Function

Wire color (Micro Motion 4-wire

cable)

Core processor

terminals

Barrier I.S.

terminals

RS-485 A

White

RS-485 B

Green

VDC +

Red

VDC –

Black

44 (RS-485 B)

43 (RS-485 A)

41 (VDC –)

42 (VDC +)

14 (RS-485 B)

13 (RS-485 A)

11 (VDC –)

12 (VDC +)

I.S. terminals

for connection to core processor

Non-I.S. terminals

for connection to remote host and power supply

Содержание Micro Motion MVD Direct Connect































Результаты поиска

Содержание Micro Motion MVD Direct Connect

Отзывы:

Бренды по названию

Популярные бренды

Emerson Micro Motion MVD Direct Connect, Руководство по установке

Результаты поиска

Содержание Micro Motion MVD Direct Connect

Отзывы:

Бренды по названию

Популярные бренды