Emerson Micro Motion 3711, Руководство по конфигурации и использованию, Страница: 18 / 234

10 Micro Motion
®
Model 3711 Gas Flow Computers
Getting Started
2.4.3 TLP system
Particular locations, or “points,” in Model 3711 memory are identified using a TLP system, where:
• T = Type
• L = Logical number
• P = Parameter
For example, a TLP value of
AOU B3, EU
represents the value, in engineering units, of the analog
output associated with point B3 in the Model 3711’s physical memory.
ROCLINK 800 uses the TLP system during configuration. When the TLP symbol (an ellipsis, or
...
) is
displayed on a button, the button provides access to the Select TLP dialog box, shown in Figure 2-5.
Figure 2-5 Select TLP dialog box
TLP notation can be text, as shown here, or numeric. For example, if numeric notation is configured,
AOU B3, EU will be represented as 4 18, 6 . See Section 3.5 for information on configuring TLP
notation.
To use the Select TLP dialog box:
1. Highlight the point type of the desired point.
2. Highlight the logical number of the desired point.
3. Highlight the desired parameter associated with the specified point.
See Appendix C for additional information on points and the TLP system.