Emerson Micro Motion 3711, Руководство по конфигурации и использованию, Страница: 15 / 234

Configuration and Use Manual 7
Getting Started
Ge
tti
n
g
Sta
rted
Co
mm
uni
cati
on
s
Sy
stem
Be
fo
re
Y
o
u
Begin
2.4 Using ROCLINK 800
This section describes how to start ROCLINK 800, how to log into ROCLINK 800, and how to
connect from ROCLINK 800 to the Model 3711.
2.4.1 Starting ROCLINK 800
You can start ROCLINK 800 using any of the following methods:
• Double-clicking the
ROCLINK 800
shortcut on the desktop
• Selecting
Start > Programs > ROCLINK 800 > ROCLINK 800
• Double-clicking the file
ROCLINK.EXE
. In typical installations, this file is located in
C:\Program Files\ROCLINK 800.
Enter your ROCLINK 800 operator ID and password, and click
OK
. If you have not yet defined
ROCLINK 800 operator IDs and passwords, use the ROCLINK 800 default values:
• Operator ID:
LOI
• Password: 1000
Note: This operator ID allows you to start ROCLINK 800. It does not provide access to the
Model 3711.
Note: To enter the default values (LOI and 1000) automatically, press ALT-ENTER or CTRL-ENTER
at the sign-on screen.
Note: For information on defining ROCLINK 800 operator IDs and passwords, see Section 3.3.1. For
information on defining Model 3711 operator IDs and passwords, see Section 3.3.2.
2.4.2 ROCLINK 800 user interface
Upon successful login, the Device Directory window, shown in Figure 2-2, is displayed.
Figure 2-2 Device Directory window
Device directory
Toolbar
Menu bar
Connection indicator
Direct Connect icon
Connect icon