Emerson Micro Motion 2400S, Руководство по установке

Страница: 21 / 44

Installation Manual 17
I/O Wiring – Model 2400S Analog Transmitters
P
o
wer Su
ppl
y
I/O
W
irin
g
– DP
an
d
DN
I/
O W
iri
n
g
– AN
Be
fo
re
Y
o
u
Begin
3.4.3 Discrete output wiring
Discrete output wiring depends on whether you will use internal or external power. The following
diagrams are examples of proper wiring for these configurations:
• Internal power – Figure 3-9
• External power – Figure 3-10
Figure 3-9 Discrete output wiring – Internal power
Figure 3-10 Discrete output wiring – External power
Excessive current will damage the transmitter. Do not exceed 30 VDC input. Terminal current must be
less than 500 mA.
Total load
Note: See Figure 3-11 for output
voltage versus load information.
+
–
–
+
Pull-up resistor or
DC Relay
3–30 VDC
Maximum sink current: 500 mA
+
–
Note: Refer to Figure 3-12 for recommended
resistor versus supply voltage.