28 Chapter 3 Web Page Of RDU-SIC G2
RDU-SIC G2 Card User Manual
4) Set the
User Type
:
‘Authenticated & Encrypted’, ‘Authenticated & Not Encrypted’, ‘Not Authenticated & Not
Encrypted
’;
5) Select
Authentication Protocol
:
‘MD5’, ‘SHA’;
6) Select
Privacy Protocol
:
‘DES’;
7) Self-define
Authentication Password
and
Privacy Password
.
Note
1. On the base of SNMP V2, SNMP V3 adds user authentication and privacy strategies.
2. If you select ‘Not Authenticated & Not Encrypted’ for
User Type
, the drop-down boxes of
Authentication Protocol
and
Privacy Protocol
will become gray, so you cannot set them;
3. Currently, only ‘DES’ is supported for
Privacy Protocol
.
4. You need to self-define
Authentication Password
and
Privacy Password
, which contain at least 8 characters, and be the
same as the password set by the host of SNMP agent data receiving end, or it cannot be decrypted and received.
After parameter setting, click the
Add
button to add NMS;
If you need to modify NMS setting, select the NMS which needs to be modified, modify the setting and then click the
Modify
button to save the setting;
If you need to delete NMS, select the NMS which needs to be deleted, and then click the
Delete
button to delete the
NMS.
Figure 3-48 SNMP V3 setting
4. Remote Service
Click the
Network Setting
under the
System Options
menu, and then click the
Remote Service
tab, the page shown
in Figure 3-49 pops up.
Содержание Liebert Vertiv RDU-SIC G2
Страница 2: ......
