Emerson Liebert GXT4-10000RT230 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 68

background image

Communication

Liebert

®

GXT4

™

User Manual

40

5.2 USB Port Communication

The standard B-type USB port is used to connect the UPS and network server or other computer system
using Liebert MultiLink

®

.

A standard B-type USB port is provided to allow connection to a computer or network server. The USB port
can be used to communicate with the Liebert GXT4 configuration program (see section

Configuration Program

for details) or Liebert MultiLink (refer to

5.1.1 - Liebert MultiLink

for description)

that is provided on the CD that is included with the UPS.

5.2.1

Configuration Program

The configuration program is on the Liebert GXT4 CD and can be used instead of making configuration
setting changes from the LCD panel. The configuration program communicates to a computer running a
Microsoft

®

Windows

®

operating system via the included USB cable.

For most users, the factory default settings are adequate. This section give a brief overview of the features
and parameters that are available for modification, as well as the factory default settings. Should any
changes be necessary, refer to the Configuration Program User Manual that is located on the included CD
for further details.

The configuration program allows these features of the Liebert GXT4 to be changed:

• Change and set the display language

• Enable/Disable Auto-Restart (default is Enable)

• Select frequency converter operation with a fixed output frequency of 50Hz or 60Hz, bypass disabled

(default is Auto-Select with bypass enabled)

• Set the Low Battery Warning alarm time from 2 to 30 minutes (default is 2 minutes)

• Enable/Disable the Auto-Battery test (default is Enable)

• Enable/Disable Auto-Restart after removing Remote shutdown (default is Disable)

• Set the wiring mode of Remote shutdown (default is normally open)

• Set the Auto-Enable output after remote shutdown (default is Disable)

• Set the Auto-Battery test to 8, 12, 16, 20, or 26 weeks (default is 8 weeks)

• Select the number of external battery cabinets connected to the UPS to adjust the remaining run time

calculated by Emerson

®

software products (default is zero)

• Select one of multiple output voltages to match various voltages (see

NOTICE

The output voltage settings cannot be changed while the UPS is On and powering connected
loads.

Table 5-1

Output voltage option

UPS Model

FactoryDefault Setting

Output Voltage Option

All models

230 VAC

200V, 208V, 220V, 230V, 240V

NOTE

• This program is compatible with UPS models beginning with ‘GXT4,’ as in ‘GXT4-3000RT230.’

It is not compatible with earlier versions of the Liebert GXT UPS.

• A computer running Microsoft

®

Windows 2000

®

, Windows XP

®

, Windows Vista

®

, Windows 7 or

Windows 8 is required to set up and run the configuration program.

«
...
46
47
48
49
50
...
»

Содержание Liebert GXT4-10000RT230





































































Отзывы:

Нет отзывов

Похожие инструкции для Liebert GXT4-10000RT230

Бренд: Qoltec Страницы: 5

Бренд: N1C Страницы: 88

EA900RT G4 10KH

Бренд: SAI Canarias Страницы: 40

Бренд: DKC Страницы: 44

Бренд: Connection N&C Страницы: 4

Бренд: Chloride Страницы: 67

PowerBank SC-425

Бренд: Aristel Страницы: 8

Бренд: CertaUPS Страницы: 2

Бренд: Minuteman Страницы: 4

Бренд: EOTL Страницы: 18

Бренд: Cover Страницы: 44

Бренд: Cover Страницы: 106

Бренд: Eaton Страницы: 8

Бренд: Eaton Страницы: 69

Бренд: Metek Страницы: 36

Бренд: Tripp Lite Страницы: 2

OMNI1500XLNAFTA

Бренд: Tripp Lite Страницы: 6

Бренд: Tripp Lite Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды