Emerson LC260EM2 Скачать руководство пользователя страница 26

Страница: 26 / 32

Note

• Use an HDMI cable with the HDMI logo (a certified HDMI cable).

High Speed HDMI cable is recommended for the better

compatibility.

For HDMI connection (use HDMI 1 or 2 Input jack)

• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/30/60Hz

of video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.

• This unit accepts 5.1 channel audio signal (Dolby Digital) and 2

channel audio signal (LPCM).

• This unit accepts only signals in compliance with EIA861.

For HDMI-DVI connection

• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.

• HDMI-DVI connection requires separate audio connections as

well and the audio signals are converted from digital to analog.

• DVI does not display 480i image which is not in compliance with

EIA/CEA-861/861B.

Component Video Connection

Component Video connection offers better picture quality for

video devices connected to the unit.

If you connect to the unit’s Component Video Input jacks,

connect Analog Audio cables to the Analog Audio L/R Input

jacks right below the Component Video connector jacks.

CHAPTER 15

REPEAT A-B

TITLE 5

COMPONENT VIDEO OUT

Pr/Cr

Pb/Cb

AUDIO OUT

(red)

(blue)

(green)

Blu-ray / DVD recorder

with the component video output jacks

audio cables

component video cables

(red / blue / green)

Note

• The unit accepts 480i / 480p / 720p and 1080i of video signals for

this connection.

Composite Video Connection

Composite Video connection offers standard picture quality

for video devices connected to the unit. If you connect to the

unit’s Composite Video Input jack (VIDEO), connect audio

cables to the Audio L/R Input jacks below the Composite

Video connector jack. When the Audio is monaural, then only

connect to the Audio L Input jack.

STEREO

STAND-BY

AUDIO OUT

VIDEO

OUT

audio cables

video cable

camcorder

video game

VCR

Note

• Whenever you connect to the Composite Video Input jack (VIDEO),

you must disconnect the Component Video Input jacks (Pb and Pr).

If you leave those jacks connected, it may cause of unstable picture.

Digital Audio Output Connection

(for digital broadcasting only)

If you connect this unit to an external digital audio device, you

can enjoy multi-channel audio like 5.1ch digital broadcasting

sound.

Use a digital audio coaxial cable to connect the unit to

external digital audio devices.

DIGITAL AUDIO

COAXIAL IN

Dolby Digital

decoder

digital audio coaxial cable

Содержание LC260EM2

































Результаты поиска

Содержание LC260EM2

Отзывы:

Бренды по названию

Популярные бренды

Emerson LC260EM2, Руководство пользователя

Результаты поиска

Содержание LC260EM2

Отзывы:

Бренды по названию

Популярные бренды