The wall outlet for your dispenser must have power supplied to it continuously
and must be fused. It should not be controlled by the same wall switch
that operates your disposer.
6
PREPARATION
START HERE
PROPER INSTALLATION SHOULD TAKE ABOUT 2-4 HOURS
n
n
Identify locations for the dispenser
faucet, tank and filter (if applicable).
n
n
Check to make sure there is proper
clearance (see chart at left) for
dispenser handles to be fully opened.
n
n
Check to make sure counter is not
too thick (see chart at left).
n
n
Make sure there is a grounded
electrical outlet under the sink.
n
n
Turn off water supply.
n
n
If using the sink sprayer hose hole,
remove nut that connects sprayer
hose at bottom of faucet.
n
n
Using adjustable wrench, remove nut
connecting sprayer washer flange in
sprayer hole.
n
n
Plug hose opening with either a 1/8"
plug or a 1/4" cap
(not supplied).
1
A
B
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
1
2
3
Brass Nut
Ferrule
Brass Insert
Wing Nut
Plug
Fiber
Washer
Brass Nut
Ferrule
Wing Nut
Fiber
Washer
HC1100 ............ 4" ............................3"
GN1100 ............ 4
3
⁄
8
" ..........................3"
HC .................... 3
1
⁄
8
" ..........................
3
⁄
4
" *
GN .................... 3
3
⁄
8
" ..........................
3
⁄
4
" *
HC-View ............ 4" ............................
3
⁄
4
" *
H-View .............. 4
3
⁄
8
" ..........................
3
⁄
4
" *
HC-Wave .......... 3
1
⁄
8
" ..........................
3
⁄
4
" *
H-Wave ............ 3
3
⁄
8
" ..........................
3
⁄
4
" *
H990 / H770 ...... 2" ............................3"
2" extension is available for oversized counters
If you have to drill through sink or
countertop, you may need to rent or purchase
the appropriate tools.
Consult a professional before drilling into
a surface other than stainless steel.
C
Required minimum from
center of hole to wall
Maximum counter
thickness (depth)
*
What if you don’t have a sprayer hole or
don’t want to use it?
n
n
Many homeowners replace the soap
dispenser in their sink with an instant
hot water dispenser.
n
n
If drilling a hole into a stainless steel
sink or counter top, you can cut a
mounting hole for the dispenser with a
hole saw for stainless steel, or you can
use a hole punch.
Model
Required Hole Size
HC1100
1
3
⁄
8
" - 1
1
⁄
2
"
All others
1
1
⁄
4
" - 1
1
⁄
2
"
In-Sink-Erator Internet Dealer
www.NeedPlumbingSupplies.com 800-728-8890
In-Sink-Erator www.NeedPlumbingSupplies.com 800-728-8890
