Rack-out control/power assembly on units up to 600A,
to allow maintenance, service, or full replacement
without disrupting the critical load
3-pole configurations
Top and bottom cable entry
Dual-lug installation bus with pem nuts for
single-hand installation and "hot" torque service
Optional Features*
Full range of Open Comms™ hardware and software
Internal modem for dialing out alarms to phone or pager
Color touch-screen LCD interface
eliminates mechanical pushbuttons
Intuitive user interface with
drop-down menus and dialog boxes
Programmable output relays for custom
customer alarms and connections
Customizable input relays allow alarms from other
devices to be displayed on HiSwitch2 display
*Compatible with LCD Panel only
Technical Features
[Liebert Hiswitch2]
Rating (A)
Dimensions (W x D x H)
Weight*(kg)
[mm]
100
762 x 813 x 1956
354
250
762 x 813 x 1956
354
400
965 x 813 x 1956
544
600
965 x 813 x 1956
544
800
2134 x 813 x 1956
1134
1000
2134 x 813 x 1956
1134
*Note: Actual Weights will vary depending on installed options.
While every precaution has been taken to ensure accuracy and completeness in this literature, Liebert Corporation assumes no responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions. © 2004 Liebert Corporation. All rights reserved throughout the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners. ® Liebert and the Liebert logo are registered trademarks of the Liebert Corporation.
® Keeping Business in Business is a registered trademark of the Liebert Corporation. The Emerson logo is a trademark and service mark of Emerson Electric Co.
Liebert HIROSS UPS Sales Headquarters
Via Leonardo da Vinci,8
35028 - Piove di Sacco (PD)
tel. +39 049 9719111 fax +39 049 9719317
Liebert HIROSS Services Headquarters
Via Leonardo da Vinci,8
35028 - Piove di Sacco (PD)
tel. +39 049 9719111 fax +39 049 9717053
Emerson Network Power Ltd - UK
Fourth Avenue, Globe Park - Marlow
Buckinghamshire - SL71YG
tel. +44 1628 403200 fax +44 1628 403203
www.liebert-hiross.com
Specifications
Operating Specifications
Voltage: 208, 220, 240, 380, 400, 415 VAC
(field selectable), +/- 10%
Frequency: 50 or 60 Hz (field selectable), +/- 5%
Short-circuit Withstand Capability: 100kA at 208VAC,
from 65kA to 100kA at 480VAC (depending on the rating)
Sense and transfer time: 5ms maximum
Overload Capability: 125% for 10 minutes,
150% for 2 minutes, 110% for 1 hour
Operating Temperature: 0 to 40° C
Standard Features
All components front accessible for installation
and service; no side or rear access required
Triple-redundant DSP digital logic
Dual-redundant power supplies
100% rated, fuseless design
Flash memory enables firmware updates
while supporting critical load
CANBUS internal control wiring
