9
Press the Skip/Forward (
) or
Skip/Reverse (
) Buttons
❶
to
select the first track that you wish to
program. Example: Track 5. When
the desired track number (Example:
Track 5) is flashing in the display,
press the CD PROGRAM Button
❷
again. The display will briefly show
Program Memory #1 and then your
desired track number (Example:
Track 5) will resume flashing. This
confirms that Track 5 has been
entered into CD Program Memory #1.
1
1
2
4
Press either the Skip/Forward
(
) or Skip/Reverse (
)
Buttons
❶
to select the next track
you wish to program (Example:
Track 8). When Track 8 is
flashing in the display, press the
PROGRAM Button
❷
again. The
display will briefly show Program
Memory #2 and then Track 8 will
resume flashing. This confirms
that Track 8 has been entered
into CD Program Memory #2.
1
1
2
5
Repeat step 5, selecting a
different track each time, until you
have programmed up to 20 track
numbers into the CD Program
Memory.
1
1
2
6
After programming up to 20 tracks in the CD Program Memory, press the CD
PLAY/PAUSE (
❿
) Button
❶
to begin programmed playback. The Program
indicator will begin flashing in the display and playback will begin on the first
track that you programmed. The player will continue to play all of the tracks that
you programmed in the order in which you programmed them. When the last
programmed track has been played, the player will stop and the display will
again show the total number of tracks on the disc. The Program indicator
remains in the display and the program is still active. If you press the Program
button and then press the CD PLAY/PAUSE button
❶
again, playback will start
on the first track you programmed and will continue until all the programmed
tracks have been played.To cancel the Programmed Playback mode, press the
CD Door OPEN Button
❷
to open the CD Compartment Door or set the
FUNCTION Switch
❸
to the RADIO or TAPE(Off) positions.
1
2
3
7
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, program
the tracks you wish to hear in the
order you wish to hear them, as
described above. Then, press the
REPEAT Button once. Both the
Program and Repeat indicators will
appear in the display.
1
Press the CD PLAY/PAUSE (
❿
)
Button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
2
Program Repeat operation will
continue indefinitely until you
press the CD STOP (
■
) Button
❶
,
open the CD door or set the
FUNCTION Switch
❷
to the
RADIO or TAPE (Off) position.
1
2
3
PROGRAMMED REPEAT
HK25 O/M.QXD 8/21/01 3:01 PM Page 9
