20
evening, when it is colder outside, it may drop below your temperature alarm setpoint
inside the home and then call you with a temperature alarm. Then, during the day, the
temperature may return above the temperature alarm setpoint because the sun is out.
This would cause the FreezeAlarm to potentially reset during the day and call you again
at night – at 2am of course.
3.5 How to Cancel the “Alarm Call-Out” and reset your FreezeAlarm
Two things need to happen to reset the FreezeAlarm. The alarm call-out must be
canceled and the alarm condition needs to be corrected. Once both of these things have
happened, the FreezeAlarm will automatically reset.
You can cancel the alarm call-out in one of three methods.
1.
If you answer a call from the FreezeAlarm, the FreezeAlarm will give you an
opportunity to enter the four digit security code which will cancel the alarm call-
out.
2.
If the FreezeAlarm has left alarm messages on your answering machine or voice
mail, you can remotely call into the FreezeAlarm and cancel the alarm call-out by
following the prompts.
3.
Go to the monitored location and if the FreezeAlarm is still dialing out to the call-
to phone numbers, you can simply switch the front toggle switch to STANDBY
mode and then back again to the ON position. This is a physical reset that can only
be done at the monitored location. You will see the red
ALARM
light go off when
you reset the FreezeAlarm in this fashion. Doing this does not erase any
programmed phone numbers, security codes or other settings. Those settings will
be retained indefinitely even if the power cord is unplugged and the battery is
removed.
Canceling the Alarm Call-Out during a call from the FreezeAlarm:
When the FreezeAlarm calls you, you will initially hear either the factory recorded
alarm message or your custom alarm message that you recorded during the
programming section.
Hello, this is your Automated Monitoring System.
(Or you will hear your
custom alarm message that was recorded earlier)
There is an alarm condition at your remote monitored location. The following
alarms currently exist or have occurred recently.
This will be followed by one or more alarm conditions. A four digit location
code will also be played. This is the same number as your security code.
There is a temperature alarm at location # # # #
The power at location # # # # has been out for # # # minutes and is
currently on
(or
off
).
There is a battery alarm at location # # # #.
Please check conditions at your monitored location immediately.
