Emerson FISHER RSS Series, Инструкция по эксплуатации

Страница: 1 / 12

www.Fisher.com
D101299X012
Design RSS Lined Valve
Contents
Introduction 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scope of Manual 1 . . . . . . . . . . . . . . . . . . . . . . . . . .
Description 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Packing Maintenance 5 . . . . . . . . . . . . . . . . . . . . . .
Replacing Packing and Bushing Inserts 5 . . . . . .
Trim Maintenance 7 . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembly 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Ordering 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts List 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
Scope of Manual
This instruction manual includes installation,
maintenance, and parts information for 0.5 through
4-inch Design RSS lined globe valves. Refer to
separate manuals for instructions covering the
actuator, positioner, and accessories.
Description
The Design RSS lined globe-style valve (figure 1)
has pure-modified PTFE trim parts, push-down-to-
close action, and positive shutoff. This valve is
intended for applications involving severely corrosive
and toxic flowing media, and is well-suited for pure
media applications, as well. The Design RSS valve
body provides an economical alternative to alloy
valve bodies in a wide variety of applications.
No person may install, operate, or maintain a Design
RSS valve without first D being fully trained and
qualified in valve, actuator and accessory
installation, operation and maintenance, and
D carefully reading and understanding the contents
of this manual. If you have any questions concerning
these instructions, contact your Fisher sales office
before proceeding.
Figure 1. Design RSS Valve with Type 667 Actuator
and Type 3582 Positioner
W4453–1 / IL
Specifications
Specifications for the Design RSS valve are shown
in table 1. If the valve is shipped with the actuator,
some of the valve specifications are on the valve
nameplate, which is attached to the actuator. If the
valve is shipped without the actuator, the valve
nameplate is wired to the valve.
Note
Neither Emerson, Emerson Process
Management, nor Fisher assume
responsibility for the selection, use, or
maintenance of any product.
Responsibility for proper selection,
use, and maintenance of any Fisher
product remains solely with the
purchaser and end-user.
Instruction Manual
Form 5592
March 2005
RSS Valve