background image

N100, N100A, N110, and N120 Series

The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher is a mark owned by Fisher Controls, Inc., a 

business of Emerson Process Management.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or 

guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such 

products at any time without notice.

Emerson Process Management does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any Emerson 

Process Management product remains solely with the purchaser.

©Emerson Process Management Regulator Technologies, Inc., 2002, 2009; All Rights Reserved

LP-Gas Equipment

Emerson Process Management 

Regulator Technologies, Inc. 

USA - Headquarters

McKinney, Texas 75070 USA

Tel: 1-800-558-5853

Outside U.S. 1-972-548-3574

For further information visit www.emersonprocess.com/regulators/lp

Types N110 and N120 Bypass and  

     

Backpressure Valve (Figures 5 and 6)

 

 

Key  Description  

Part Number

  1 

Body, Ductile iron

 

  NPS 3/4   

T1058019232

 

  NPS 1   

T1058419232

  2*  Valve Guide Orifice, Aluminum  

T20819T0012

  3 

Valve Plug, 303 Stainless steel

 

  Type N110  

T1058135022

 

  Type N120   

T1069235032

  4*  Diaphragm, Nitrile (NBR) 

1E621702052

  5 

Diaphragm Head, Aluminum  

T1057809012

  6 

Nut, Zinc-plated steel 

T1059325552

  7 

Spring Case, Ductile iron  

T1057519232

  8 

Spring, Stainless steel

 

  25 to 75 psig (1,7 to 5,2 bar)  

T1057737082

 

  50 to 150 psig (3,5 to 10,3 bar)  

T1057637082

 

  12 psig (0,83 bar) 

T1069737022

Key  Description  

Part Number

  9 

Spring Adjustment Assembly, Steel/Stainless steel

 

  Type N110  

T10579000A2

 

  Type N120   

T10699000A2 

  10*  O-Ring, Nitrile (NBR)

 

  Type N110  

T12946T0012

 

  Type N120   

T1069606562

  11  Union Nut, Ductile iron  

1E471119062

  12  Seal Cap, Aluminum

 

  Type N110  

1P382947062

 

  Type N120   

T1069347062

  13*  Washer, Nylon (PA)  

1P383006162

  14  Pipe Plug, Carbon steel  

T13718T0012

  16*  O-Ring (Type N120 Only), Nitrile (NBR)  

1K314806992

  17*  O-Ring (Type N120 Only), Nitrile (NBR)  

T12945T0012

  18  O-Ring Washer (Type N120 Only), 303 SST  

1D335935072

  19  Machine Screw (Type N120 Only), Carbon plated-steel  16A0429X012

*Recommended spare part

Содержание Fisher N100 Series









Отзывы: