Types 95L, 95H, 95HP, and 95HT
2
Available Configurations
Type 95L:
Low-pressure regulator for 2 to 30 psig
(0,14 to 2,1 bar) outlet pressures
Type 95H:
High-pressure regulator for 5 to 150 psig
(0,34 to 10,3 bar) outlet pressures
Type 95HP:
High-pressure regulator for
15 to 400 psig (1,0 to 27,6 bar) outlet pressures
(soft-seated)
Type 95HT:
High-pressure/high temperature
regulator for 15 to 300 psig (1,0 to 20,7 bar) outlet
pressures (metal seat) and up to 650°F (343°C)
Body and Orifice Sizes
NPS 1/4 body:
1/4-inch (6,4 mm) orifice
NPS 1/2 (DN 15) body:
3/8-inch (9,5 mm) orifice
NPS 3/4 and 1 (DN 20 and 25) bodies:
9/16-inch (14 mm) orifice
NPS 1-1/2 and 2 (DN 40 and 50) bodies:
1-1/16-inch (27 mm) orifice
End Connection Styles
NPT, ASME flanged; all sizes are fabricated with
slip-on flanges and are 14-inches face-to-face
(EN flanged-356 mm face-to-face), CL150 RF,
CL300 RF, PN 16/25/40, or SWE.
Maximum Cold Working Pressures of Body Size
and Material
See Table 2
Outlet Pressure Ranges
See Table 1
Maximum Temperature Ranges of Diaphragm and
Seat Materials
(1)(2)
MATERIAL
TEMPERATuRE RANGE
Nitrile (NBR)
Neoprene (CR)
Fluorocarbon (FKM)
(3)
Ethylenepropylene (EPDM)
Perfluoroelastomer (FFKM)
Polytetrafluoroethylene (PTFE)
Stainless Steel
-40° to 180°F
-40° to 180°F
0° to 300°F
-40° to 275°F
0° to 425°F
-40° to 400°F
-40° to 650°F
(-40° to
82°C)
(-40° to
82°C)
(-18° to 149°C)
(-40° to 135°C)
(-18° to 218°C)
(-40° to 204°C)
(-40° to 343°C)
1. The pressure/temperature limits in this Instruction Manual, and any applicable standard or code limitation should not be exceeded.
2. Pressures and/or the body end connection may decrease these maximum temperatures.
3. Fluorocarbon (FKM) is limited to 200°F (93°C) hot water.
Specifications
Maximum Temperature Ranges of Body Materials
(1)(2)
REGuLATOR
BODy AND SPRING
CASE MATERIALS
TEMPERATuRE RANGE
Type 95L
Type 95H
Cast Iron
Steel
Stainless Steel
-40° to 406°F (-40° to 208°C)
-20° to 450°F (-29° to 232°C)
-40° to 450°F (-40° to 232°C)
Type 95HP
Steel
Stainless Steel
-20° to 450°F (-29° to 232°C)
-40° to 450°F (-40° to 232°C)
Type 95HT
Steel
Stainless Steel
-20° to 650°F (-29° to 343°C)
-40° to 550°F (-40° to 288°C)
Pressure Setting Adjustment
Adjusting screw (standard), Handwheel/Tee
handle (optional):
NPS 1/2 (DN 15) body has a
handwheel, all other sizes have tee handles.
Pressure Registration
Internal
Shutoff Classification Per ANSI/FCI 70-3-2004
Metal Seats:
Class IV
Elastomer Seats:
Class VI or better
PTFE:
Class IV
Approximate Weights
Types 95H, 95HP, and 95HT:
NPS 1/4 body:
4 pounds (2 kg)
NPS 1/2 (DN 15) body:
8 pounds (4 kg)
NPS 3/4 and 1 (DN 20 and 25) bodies:
20 pounds (9 kg)
NPS 1-1/2 and 2 (DN 40 and 50) bodies:
73 pounds (33 kg)
Type 95L:
NPS 1/4 body:
6 pounds (3 kg)
NPS 1/2 (DN 15) body:
12 pounds (5 kg)
NPS 3/4 and 1 (DN 20 and 25) bodies:
32 pounds (15 kg)
