Installation
Instruction Manual
Form 5739
February 2002
2–5
Figure 2-3. Typical Transducer Mounting with Universal Mounting Bracket (Continued)
mm
(INCH)
30
(1.18)
23
(.89)
4 X 10 (0.375)
5 X 10 (0.375)
89
(3.50)
89
(3.50)
59
(2.312)
29
(1.16)
29
(1.13)
38
(1.50)
U-BOLT SLOTS
19 (0.75)
29
(1.125
57
(2.25)
2 X 10 (0.375)
4 X 5 (0.188)
DETAIL A" MOUNTING BRACKET
DETAIL B" ADAPTER PLATE
FOR STAINLESS STEEL HOUSING,
ALIGN 4 HOLES WITH I/P HOUSING
FOR ALUMINUM HOUSING,
ALIGN 3 HOLES WITH I/P HOUSING
NOTE:
1. ATTACH THE BRACKET SHOWN IN DETAIL “A” TO THE TRANSDUCER
2. ATTACH THE ADAPTER PLATE SHOWN IN DETAIL “B” TO THE VALVE OR PIPE.
3. CONNECT THE TWO PIECES.
34B4990-C
34B5000-B
E0787
Output Pressure
Connect the output signal line to the transducer at
the output port. The output port is 1/4–18 NPT, as
shown in figure 2-1. The output gauge port can be
used as an alternate signal port. If the gauge port is
used as a signal port, a threaded plug must be
installed in the output port.
The output gauge port allows connection of an
output gauge to provide local output signal
indication. The output gauge port is 1/4–18 NPT. If
an output gauge is not specified, a threaded plug is
shipped with the transducer. The plug must be
installed in the output gauge port when the port is
not used.
WARNING
The following conditions may cause
failure of the output gauge resulting in
personal injury, and damage to the
transducer and other equipment:
D
pressure beyond the top of the
gauge scale.
Содержание Fisher 3311
