background image

- 5 -

EN

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

LOCATION

For safe operation and satisfactory performance of
your unit, keep the following in mind when selecting
a place for its installation:

Shield it from direct sunlight and keep it away from
sources of intense heat.

Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top or bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.

Install unit in a horizontal position.

Avoid locations subject to strong vibration.

Do not place the unit near strong magnetic fields.

Avoid moving the unit to locations where tempera-
ture differences are extreme.

Be sure to remove a disc and unplug the AC power
cord from the outlet before carrying the unit.

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.

If by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.

Do not put your fingers or objects into the unit disc
loading tray.

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a unit which has
moisture, it may damage the DVD and the unit.
Therefore when the condensation occurs inside the
unit, turn the unit on and allow at least 2 hours for the
unit to dry out.

The following symbols below appear in some head-
ings and notes in this manual, with the following
meanings

: Description refers to TV/VCR operation (in the

TV/VCR mode).

: Description refers to playback of DVD video discs

(in the DVD mode).

: Description refers to playback of Audio CDs 

(in the DVD mode).

: Description refers to the items to be set by the 

QUICK mode (in the DVD mode).

QUICK

CD

DVD-V

TV/VCR

SYMBOLS USED IN THIS MANUAL

SUPPLIED ACCESSORIES

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call our
help line mentioned on the front page.

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators
(Splitter). Contact your local electronics store for these items.

Batteries

Remote Control Unit

2 AA Batteries

NE211UD

Owner’s Manual

1EMN20210

Owner's Manual

Содержание EWC19T5

























































Отзывы: