Emerson EVH Series, Руководство по установке, Страница: 34 / 52

34
Startup Wizard Instructions
For any further explanations of the below items please see Emerson AE bulletin AE-1466. Information for Items 6-13 can be
found in Copeland Mobile or OPI for the specific compressor model. For general motors, on the nameplate.
Item Description
1 Startup Wizard Press OK?
Item Description
18 Auto 1 Control Place
0 = I/O terminal Start 1
2 Application 0 = basic
1 = PID
1 = Fieldbus
2 = I/O terminal start 2
2 = Advanced
3 = Keypad
3 Language 0 = English
1 = Chinese
19 Auto 1 Reference 0 = AI1
1 = AI2
2 = Deutsch
4 Real Time Clock yy.mm.dd
hh:mm:ss
5 Daylight Saving 0 = Off
1 = EU
2 = US
6 Min Frequency Min: 0.00Hz
Max: Max Frequency
7 Max Frequency
Min: Min Frequency
Max: 400. 00Hz
8 Motor Nom Current Min: 0.1A
Max: 500.0A
9 Current Limit Min: Ih*1/ 10
Max: Ih*2
10 Motor Nom Speed Min: Ih*1/ 10
Max: Ih*2
11 Motor PF Min: 0.30
Max: 1.0
12 Motor Nom Voltag e Min: 180V
Max: 690V
13 Motor Nom Frequency Min: 30.00 Hz
Max: 400. 00 Hz
14 Accel Time 1 Min: 0.1 sec
Max:3000.0 sec
15 Decel Time 1 Min: 0.1 sec
Max:3000.0 sec
16 Hand Control Place 0 = Keypad
1 = I/O Terminal Start 1
2 = I/O Terminal Start 2
3 = Feildbus
17 Hand Reference 0 = AI1
1 = AI2
2 = Slot A: AI1
3 = Slot B: AI1
4 = AI1 Joystick
13 = AI1 * AI2
14 = AI1 or AI2
15 = Min(AI1,AI2)
16 = Max(AI1,AI2)
17 = PID1 Control Output
5 = AI2 Joystick
6 = Keypad
18 = PID2 Control Output
7 = Feildbus
9 = Max Fre quency
10 = AI1 + AI2
11 = AI1 - AI2
12 = AI2 - AI1
2 = Slot A: AI1
3 = Slot B: AI1
4 = AI1 Joystick 5
= AI2 Joystick 6 =
Keypad
7 = Feildbus
9 = Max Frequency
10 = AI1 + AI2
11 = AI1 - AI2
12 = AI2 - AI1
13 = AI1 * AI2
14 = AI1 or AI2
15 = Min(AI1,AI2)
16 = Max(AI1,AI2)
17 = PID1 Control Output
18 = PID2 Control Output
20 Bypass Enabled 0 = Disabled
1 = Enabled
21 Application Mini-Wizard Press OK?
Now the Startup Wizard is done. It wont show again on the
next power up. If you want to reset it, please set the Startup
Wizard (P13.1.17) or select it from the main menu screen to
enable and cycle the power to the drive.
PID and Advanced Application Mini-Wizard
The PID Mini-Wizard is activated in the Quick Setup menu.
This Wizard assumes that you are going to use the PID
controller in the “one feedback/one setpoint” mode. The
control place will be I/O A and the default process unit “%.”
The PID Mini-Wizard asks for the following values to be set:
PID Mini-Wizard values
Item Description
20 PID 1 Process Unit Select Units
21 PID1 Process Unit Min Min: –99999.99
Max: PID1 Process Unit Max
22 PID1 Process Unit Max Min: PID1 Process Unit Min
Max:
99999.99
23 PID 1 Set Point 1 Source Select Function
24 PID 1 Keypad Set Point 1 Min: PID 1 Process Unit Min
Max: PID 1 Process Unit Max
25 PID 1 Feedback 1 Source Select Input
26 PID 1 Feedback 1 Min Min: –200%
Max: 200%
27 PID 1 Feedback 1 Max Min: –200%
Max: 200%