Emerson EUCLID CF500AP00, Инструкция по эксплуатации

Страница: 9 / 68

9
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF500
HANGER BALL
WHITE WIRE
BLACK WIRE
1/2-INCH
BLUE WIRE
6 TO 9
INCHES
Figure 12
3.12
The fan comes with black, blue and white leads that are
80” long.
Measure up approximately 6 to 9-inches above top of
hanger ball / 4.5” downrod assembly (Figure 12).
Cut off excess leads and strip back insulation 1/2-inch from
end of leads.
PIN
HANGER
BALL
PHILLIPS HEAD
SET SCREW
4.5" DOWNROD
Figure 11
3.11
Route the two motor leads through the hanger ball
(Figure 11).
Reinstall the hanger ball on the downrod as follows:
Position the pin through the two holes in the downrod and
align the hanger ball so the pin is captured in the groove in
the top of the hanger ball (Figure 11).
Pull the hanger ball up tight against the pin and securely
retighten the Phillips head set screw in the hanger ball
(Figure 11).
A loose Phillips head set screw could create fan wobble.
3. Ceiling Fan Assembly
(Continued)