2 2
Normal Playback
1.) Press the
POWER/STANDBY
button to turn the system ‘On’.
2.) Press the
CD
button on front panel or
CD/TUNER
button on remote control to
select CD function.
3.) Press the
OPEN/CLOSE
button on front panel to open the CD door. Remove
the “dummy CD” transit protection cards and discard it. You cannot play your
own CD unless the card is removed.
4.) Load your own CD into the player with the printed ‘label’ facing out.
Gently press on the CD near the center hole to insure that the disc is properly
‘seated’ on the spindle.
5.) Press the
OPEN/CLOSE
button to close the CD door.
The display flashes as the player reads the
Table Of Contents on the disc.
After reading the disc the display will show the
total tracks and playing time.
Note
: The reading time may be longer if you are using CD-RW (rewritable)
discs. This is normal and not an indication of any problem with your unit.
6.) Press the
PLAY/PAUSE
button to begin
playback.
7.) Adjust the
VOLUME
and
EQ
controls as desired.
8.) Playback will continue until all tracks on the disc have been played, then the
player stops and the display shows the total tracks number and playing time on
the disc.
R E P E A T
M E M O R Y
R A N D O M
CLASSIC
R O C K
P O P
R E M A I N
X - B A S S
S L E E P
T I M E R
M U T E
P M
A M F M
M H z
K H z
C D
T U N E R
A U X
AM/FM DIGITAL TUNER
C D M I C R O S Y S T E M
CD TUNER MULTI FUNCTION DISPLAY
ES30_072905.p65
29/7/2005, 16:41
22
