R
e
mot
e
acc
ess
co
de
- ch
e
ck
i
ng /
se
tt
i
ng
You need a 3-digit code (default 000) for remote access.
Press bfiefly to check the setting.
Press and HOLD to enter setting mode. Use and to set the first digit.
Press bfiefly for confirmation, and to get to the next digits input. Follow this
procedure for entering the digits and confirm by pressing . You will hear a repeat
confirmation of code.
O
u
tgo
i
ng m
ess
ag
e
-
se
tt
i
ng / ch
e
ck
i
ng /
re
co
rdi
ng /
de
l
e
t
i
ng
Press and HOLD to select the OGM (outgoing message).
Press and HOLD until you hear a short beep. Speak your own new outgoing
message. Stop recording by pressing . You hear the new OGM.
Press briefly to check the OGM at any time.
It is only possible to select an outgoing message if the answering machine is turned on. If
the memory is full, only outgoing message 2 can be selected (only answering without
recording messages).
R
e
mot
e
acc
ess
For remote access you need a telephone using tone dialing (DTMF).
Call your number, If the answering machine is set to off it will pick up the line after 10 ring
signals. If it set to on it will pick up the line after the pre-set numbers of ring signals. You
hear an announcement and a beep. If you want to skip the announcement press the
“star” ( ) key.
9
Playback m
ess
ag
es
/
de
l
e
t
i
ng m
ess
ag
es
Press button. The messages will be played one after the other. If there are new
messages, only these will be played.
During playback
Press button to go to the beginning of the current message.
Press button twice to go to the previous message.
Press button to go to the next message.
Press button to pause playback (Pause), and restart playback.
Press button to stop playback (Stop).
Press button to delete the current message, press and HOLD for approxi-
mately 2 secodns until “dL” appears in the display. Press once again.
In idle state
Press button to delete all old messages (already heard), press and HOLD
for approximately 2 seconds until “dL” appears in the display. Press once again.
You’ll hear a confirmation announcement
*
14
R
e
g
is
t
eri
ng a han
dse
t
Up to five handsets can by registered to a base station. The handsets delivered with your
telephone are already registered. To register a “foreign” handset please refer to it’s user
manual.
Press the button. Select
REGISTER
using and press the button.
Using select a base station to subscribe to and press the button. Enter the
base’s
PIN (EM6113
base station in delivery state “000”). The phone will ask
“PRESS
BASE”
Press and
HOLD
the paging key at the base station for approximately 10 seconds.
The
LED “IN USE/CHARGE”
will begin to flash. After this the base station will be in
registration mode for one minute.
/
/
PAGE
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
MUTE
/
D
e
l
e
t
i
ng a han
dse
t
You can delete a handset from a base to allow another handset to be registered.
NOTE: You can only remove other handset in your system but you are not able to
remove the handset you are using.
Press the button. Select
DE-REGISTER
using and press the button.
Press and
HOLD
the button for approximately 3 seconds. Enter the
PIN
for base
station (EM6113 base station “000”). Enter the internal telephone number (1...5) of the
handset you want to remove.
Fla
s
h t
i
m
e
You can set the flash time to 100 ms (usially for special services fo your telephone
provider/delivery state) or 300 ms (e.g. for a telephone exchange). In case of questions
please contact your telephone provider or the system administrator of your PBX.
Press the button. Select
BASE
using and press the button.
Using select
RECALL
and press the button.
Using select
SHORT
or
LONG
and press the button.
OR
Press and
HOLD
the button for approximately 3 seconds. S (100ms) or L (300ms)
appears in the display.
Sy
s
t
e
m PIN
In delivery state the
PIN
is set to “000”. The
PIN
is valid for all registered handsets.
Press the button. Select
BASE
using and press the button.
Using select
SYSTEM PIN
and press the button. Enter the old
PIN
and
confirm by pressing the button. Enter the new
PIN
twice and confirm each by
pressing the button.
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
/
/
/
/
/
REDIAL
