Emerson daniel 1500 series, Руководство пользователя

Страница: 19 / 104

Part description for a high temperature enclosure Table 1-2:
Item
number
Description Part number
Quantity
required
1 End cap solid (Stainless steel) 1-360-00-025 1
End cap solid (Aluminum) 1-360-00-027 1
2 Electronics enclosure 899-10-110-60 1
Electronics enclosure (Aluminum) 899-10-110-70 1
3 Plug pipe hex socket 154717-019 2
4 Grounding clamp B18934-004 2
5 Mounting bracket 899-10-230-50 1
6
(1)
Socket head screw 899-10-230-52 4
7 Warning tag-Hazard 899-00-225-04 1
8 Socket head screw 899-10-230-61 2
11 Socket head screw 899-10-230-65 2
13 O-ring FKM 2-4-9163-245 1
14 O-ring FKM 1500093-022 1
15 Washer plastic 1-562-01-827 1
16 Clamp cover 1-504-90-165 1
17 Socket head screw 1-555-27-001 1
18 Terminal block 1505065 2
(1) Screw length varies on LTM sizes. The screws are not included in the part number package.
NOTICE
The joint between the LME cover and housing is a threaded joint. The joint between the LME
housing and Sensor housing is a spigot joint with a minimum axial length of 26.16 mm (1.030
in), radial length of 3.18 mm (0.125 in), and a clearance of 0.07 mm (0.0028 in).
Introduction
User manual 9