background image

15

© 2014 Emerson Climate Technologies, Inc.
Printed in the U.S.A.

AE4-1317 R10

Application Engineering

B

U

L

L

E

T

I

N

The contents of this publication are presented for informational purposes only and are not to be construed as warranties or guarantees, 
express or implied, regarding the products or services described herein or their use or applicability. Emerson Climate Technologies, Inc. and/or 
its af

fi

 liates (collectively "Emerson"), as applicable, reserve the right to modify the design or speci

fi

 cations of such products at any time without 

notice. Emerson does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use 
and maintenance of any Emerson product remains solely with the purchaser or end user.

Table 7

Recommended Oil Charges by Model Family

Note: The oil level of refrigeration scroll compressors 

should be adjusted to the mid-point of the sightglass 

during normal operation.

Model Family

Initial

Recharge

ZB10KCE

25

22

ZB11, 13, 14KCE

25

21

ZB15KC/E

44

40

ZB19, 21, 26, 29KC/E

49

45

ZB30KC/E

64

60

ZB38KC/E

64

60

ZB45KC/E

64

60

ZB48KCE

60

56

ZB57KCE

64

60

Model Number

Check Valve Type

ZB10KCE

Standard Disc

ZB11KCE

Standard Disc

ZB13KCE

Standard Disc

ZB14KCE

Standard Disc

ZB15KC/E

Spring Loaded Low-Leak

ZB19KC/E

Spring Loaded Low-Leak 

ZB21KC/E

Spring Loaded Low-Leak

ZB26KC/E

Spring Loaded Low-Leak

ZB29KC/E

Spring Loaded Low-Leak

ZB30KC/E

Spring Loaded Low-Leak

ZB38KC/E

Spring Loaded Low-Leak

ZB42KC/E

Spring Loaded Low-Leak

ZB45KC/E

Spring Loaded Low-Leak

ZB48KC

Spring Loaded Low-Leak

ZB57KC

Spring Loaded Low-Leak

Table 6

Check-Valve Type

Содержание Copeland Scroll ZBKC
















Отзывы: