background image

2

© 2015 Emerson Climate Technologies

AE8-1385 R1

Safety Instructions

Copeland Scroll

 compressors with CoreSense

 Diagnostics technology are manufactured according to the 

latest U.S. and European Safety Standards. Particular emphasis has been placed on the user's safety. Safey 

icons are explained below and safety instructions applicable to the products in this bulletin are grouped on Page 

3. These instructions should be retained throughout the lifetime of the compressor. 

You are strongly advised to 

follow these safety instructions.

Safety Instructions

 

 

 

 

Copeland Scroll

 compressors are manufactured according to the latest U.S. and European Safety 

 

Standards. Particular emphasis has been placed on the user's safety. Safey icons are explained below   

and safety instructions applicable to the products in this bulletin are grouped on Page 3. These   

instructions should be retained throughout the lifetime of the compessor. 

You are strongly advised  

to follow these safety instructions.

 

 

 

 

         Safety Icon Explanation 

 

 

DANGER indicates a hazardous situation which, if not avoided, will result 

in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could 

result in death or serious injury.

 

 

CAUTION, used with the safety alert symbol, indicates a hazardous 

situation which, if not avoided, could result in minor or moderate injury.

 

 

NOTICE is used to address practices not related to personal injury.

 

 

CAUTION, without the safety alert symbol, is used to address practices 

not related to personal injury.

DANGER

WARNING

CAUTION

NOTICE

CAUTION

Содержание Copeland Scroll UltraTech CoreSense













Отзывы: